Pre-order Enquiry
Request Free Sample
Healthcare
Aerospace & Defence
Agriculture
Automations
Chemicals & Advanced Materials
Food & Beverages
Information & Communication Technology
Oil & Gas
Power & Energy
Canned motor pump is a kind of sealless pumps. Canned Motor Pump is a centrifugal pump with hermetically sealed electric motor mounted on single shaft thus eliminating the requirement of mechanical seal or other sealing device. Entire rotating assembly is immersed in the liquid, and motor stator and rotor are isolated from the pumped liquid with corrosion resistant, non-magnetic liner and sleeve. A part of the pumped liquid is by-passed through the motor, for cooling of motor and lubricating the bearing.
Canned motor pumps are characterized by their compact and integrated design, with the motor and pump forming a single unit with the rotor and impeller fitted on to a common shaft. The rotor is guided by two slide bearings and the drive motor stator is separated from the rotor using a cylindrical metal can. The rotor compartment, together with the hydraulic section of the pump, is filled with the pumped medium during operation. The heat loss from the motor is carried off by a partial flow between the motor and stator, and the flow also lubricates both slide bearings in the rotor compartment. The can, which is a hermetically sealed component, and the motor casing offer primary and secondary containment, respectively. It is this double containment design, together with the compactness and low noise level, and differentiates the canned motor pump from the magnetically coupled pump. The design makes canned motor pump 100% leak-free. Even in the unlikely event of a stator lime rupturing there is no leakage to the atmosphere. These factors make the canned motor pump ideally suited to the safe handling of hazardous and volatile organic compounds, particularly where high temperatures and high working pressures are encountered.
Scope of the Report:
The canned motor pump industry is highly concentrated, which is due to the high barriers, including technical barriers and supply chain barriers. Also, since the gross profit in pump industry is quite easy to calculate, manufacturers found it hard to lift price unless product quality has been lift to a large extent. The major manufacturers in this industry are Teikoku, Nikkiso, Kirloskar Brothers, HERMETIC-Pumpen, Dynamic Pumps, OPTIMEX, Shinhoo, Zhejiang Dayuan, Shanghai East Pump, Dalian Huanyou, Chemmp, Shigme, Hayward Tyler, Curtiss-Wright, Harbin Electric Corporation.
Standard basic pumps are the largest type of canned motor pumps, which accounted for 36.79% in 2015. Other major types include high temperature pumps, reverse circulation pumps, pumps for liquid with high melting point, etc.
The major applications of canned motor pump are chemical industry, oil & gas, nuclear energy industry, HVAC Industry The largest consumption area in terms of volume is HVAC industry, which accounted for 49.39 % of world canned motor pumps consumption.
The worldwide market for Canned Motor Pumps is expected to grow at a CAGR of roughly 7.9% over the next five years, will reach 3390 million US$ in 2024, from 2150 million US$ in 2019, according to a new study.
This report focuses on the Canned Motor Pumps in global market, especially in North America, Europe and Asia-Pacific, South America, Middle East and Africa. This report categorizes the market based on manufacturers, regions, type and application.
Market Segment by Manufacturers, this report covers
Teikoku
Nikkiso
Kirloskar Brothers
HERMETIC-Pumpen
Dynamic Pumps
OPTIMEX
Shinhoo
Zhejiang Dayuan
Shanghai East Pump
Dlian Huanyou
Chemmp
Shigme
Hayward Tyler
Curtiss-Wright
Harbin Electric Corporation
Market Segment by Regions, regional analysis covers
North America (United States, Canada and Mexico)
Europe (Germany, France, UK, Russia and Italy)
Asia-Pacific (China, Japan, Korea, India and Southeast Asia)
South America (Brazil, Argentina, Colombia etc.)
Middle East and Africa (Saudi Arabia, UAE, Egypt, Nigeria and South Africa)
Market Segment by Type, covers
Standard Basic Pumps
High Temperature Pumps
Reverse Circulation Pumps
Pumps for Liquid with High Melting Point
Multistage Pumps
Others
Market Segment by Applications, can be divided into
Chemical Industry
Oil & Gas
Nuclear Energy Industry
HVAC Industry
Others
The content of the study subjects, includes a total of 15 chapters:
Chapter 1, to describe Canned Motor Pumps product scope, market overview, market opportunities, market driving force and market risks.
Chapter 2, to profile the top manufacturers of Canned Motor Pumps, with price, sales, revenue and global market share of Canned Motor Pumps in 2017 and 2018.
Chapter 3, the Canned Motor Pumps competitive situation, sales, revenue and global market share of top manufacturers are analyzed emphatically by landscape contrast.
Chapter 4, the Canned Motor Pumps breakdown data are shown at the regional level, to show the sales, revenue and growth by regions, from 2014 to 2019.
Chapter 5, 6, 7, 8 and 9, to break the sales data at the country level, with sales, revenue and market share for key countries in the world, from 2014 to 2019.
Chapter 10 and 11, to segment the sales by type and application, with sales market share and growth rate by type, application, from 2014 to 2019.
Chapter 12, Canned Motor Pumps market forecast, by regions, type and application, with sales and revenue, from 2019 to 2024.
Chapter 13, 14 and 15, to describe Canned Motor Pumps sales channel, distributors, customers, research findings and conclusion, appendix and data source.
Canned motor pumps are characterized by their compact and integrated design, with the motor and pump forming a single unit with the rotor and impeller fitted on to a common shaft. The rotor is guided by two slide bearings and the drive motor stator is separated from the rotor using a cylindrical metal can. The rotor compartment, together with the hydraulic section of the pump, is filled with the pumped medium during operation. The heat loss from the motor is carried off by a partial flow between the motor and stator, and the flow also lubricates both slide bearings in the rotor compartment. The can, which is a hermetically sealed component, and the motor casing offer primary and secondary containment, respectively. It is this double containment design, together with the compactness and low noise level, and differentiates the canned motor pump from the magnetically coupled pump. The design makes canned motor pump 100% leak-free. Even in the unlikely event of a stator lime rupturing there is no leakage to the atmosphere. These factors make the canned motor pump ideally suited to the safe handling of hazardous and volatile organic compounds, particularly where high temperatures and high working pressures are encountered.
Scope of the Report:
The canned motor pump industry is highly concentrated, which is due to the high barriers, including technical barriers and supply chain barriers. Also, since the gross profit in pump industry is quite easy to calculate, manufacturers found it hard to lift price unless product quality has been lift to a large extent. The major manufacturers in this industry are Teikoku, Nikkiso, Kirloskar Brothers, HERMETIC-Pumpen, Dynamic Pumps, OPTIMEX, Shinhoo, Zhejiang Dayuan, Shanghai East Pump, Dalian Huanyou, Chemmp, Shigme, Hayward Tyler, Curtiss-Wright, Harbin Electric Corporation.
Standard basic pumps are the largest type of canned motor pumps, which accounted for 36.79% in 2015. Other major types include high temperature pumps, reverse circulation pumps, pumps for liquid with high melting point, etc.
The major applications of canned motor pump are chemical industry, oil & gas, nuclear energy industry, HVAC Industry The largest consumption area in terms of volume is HVAC industry, which accounted for 49.39 % of world canned motor pumps consumption.
The worldwide market for Canned Motor Pumps is expected to grow at a CAGR of roughly 7.9% over the next five years, will reach 3390 million US$ in 2024, from 2150 million US$ in 2019, according to a new study.
This report focuses on the Canned Motor Pumps in global market, especially in North America, Europe and Asia-Pacific, South America, Middle East and Africa. This report categorizes the market based on manufacturers, regions, type and application.
Market Segment by Manufacturers, this report covers
Teikoku
Nikkiso
Kirloskar Brothers
HERMETIC-Pumpen
Dynamic Pumps
OPTIMEX
Shinhoo
Zhejiang Dayuan
Shanghai East Pump
Dlian Huanyou
Chemmp
Shigme
Hayward Tyler
Curtiss-Wright
Harbin Electric Corporation
Market Segment by Regions, regional analysis covers
North America (United States, Canada and Mexico)
Europe (Germany, France, UK, Russia and Italy)
Asia-Pacific (China, Japan, Korea, India and Southeast Asia)
South America (Brazil, Argentina, Colombia etc.)
Middle East and Africa (Saudi Arabia, UAE, Egypt, Nigeria and South Africa)
Market Segment by Type, covers
Standard Basic Pumps
High Temperature Pumps
Reverse Circulation Pumps
Pumps for Liquid with High Melting Point
Multistage Pumps
Others
Market Segment by Applications, can be divided into
Chemical Industry
Oil & Gas
Nuclear Energy Industry
HVAC Industry
Others
The content of the study subjects, includes a total of 15 chapters:
Chapter 1, to describe Canned Motor Pumps product scope, market overview, market opportunities, market driving force and market risks.
Chapter 2, to profile the top manufacturers of Canned Motor Pumps, with price, sales, revenue and global market share of Canned Motor Pumps in 2017 and 2018.
Chapter 3, the Canned Motor Pumps competitive situation, sales, revenue and global market share of top manufacturers are analyzed emphatically by landscape contrast.
Chapter 4, the Canned Motor Pumps breakdown data are shown at the regional level, to show the sales, revenue and growth by regions, from 2014 to 2019.
Chapter 5, 6, 7, 8 and 9, to break the sales data at the country level, with sales, revenue and market share for key countries in the world, from 2014 to 2019.
Chapter 10 and 11, to segment the sales by type and application, with sales market share and growth rate by type, application, from 2014 to 2019.
Chapter 12, Canned Motor Pumps market forecast, by regions, type and application, with sales and revenue, from 2019 to 2024.
Chapter 13, 14 and 15, to describe Canned Motor Pumps sales channel, distributors, customers, research findings and conclusion, appendix and data source.
Frequently Asked Questions
This market study covers the global and regional market with an in-depth analysis of the overall growth prospects in the market. Furthermore, it sheds light on the comprehensive competitive landscape of the global market. The report further offers a dashboard overview of leading companies encompassing their successful marketing strategies, market contribution, recent developments in both historic and present contexts.
- By product type
- By End User/Applications
- By Technology
- By Region
The report provides a detailed evaluation of the market by highlighting information on different aspects which include drivers, restraints, opportunities, and threats. This information can help stakeholders to make appropriate decisions before investing.
